Our phone number has changed!

What do the lights mean?

LED location	LED status	Description
	Solid Green	Internet connection Local network and Internet connection
	Flashing Green	Local network connection Local connection only, no Internet
	Flashing Red (1 sec)	SVR firmware versions 1.0.1.2 + SVR is booting/No connection SVR firmware versions below 1.0.1.2 No connection Check your Internet service.
	Solid Red	Cameras not recording or hard drive error Check LEDs on back of SVR
	Flashing Green & Red	Factory Reset Caution: This restores the device's factory default settings. It will also delete all stored videos. If it is already installed, the device may need to be removed from the account and added again after a factory reset. To perform a factory reset, push the Reset button and release when flashing Green and Red (about 15 seconds).
	Solid Green	SVR hard drive is operating normally
	Flashing Green	Hard drive is full Normal operation, oldest footage is being deleted
	Solid Red	Hard drive error Preform a diagnostic test here.
	Flashing Red every 1 second	Hard drive configuration error Preform a diagnostic test here.
	Flashing Red every 0.2 seconds	Hard drive is disconnected Preform a diagnostic test here.
	Solid Green	Camera is connected and recording
	Flashing Green	Recording is paused Camera is connected and recording is paused
	Flashing Red	Camera not recording Camera is disconnected or improperly configured