Checking the recording schedule to make sure it is active
To turn these back on, open the Fluent app and click the Three Bars in the upper left-hand corner to bring up the menu and click on the Video.Once on video, click on the Gear in the upper right-hand corner. This will bring you to settings, now click on the arrow next to Recording Schedules. Now you will see the recording schedule is turned off, indicated by the grey button next to it. To turn it on, click on the grey button and it will slide to the right and turn green. Once this is turned back on your camera will start recording clips again.
If the schedule was paused then you are done, if not continue to step 5.
Press and hold button on your doorbell camera
Continue to hold the button, it will flash in the following pattern (Flashes Green, Flashes Red/Green, Flashes Yellow, Flashes Blue)
When your doorbell camera flashes Blue release the button and the doorbell camera will reboot. (approximately 1 minute)
Allow the camera around 10 minutes to start recording again