GC3
- Ensure panel is disarmed
- Press System Settings
- Enter 4 digit code
- Tap System Tests
- Tap Sensor Test
- Trigger the sensor
- Door - Open/Close the door
- Window - Open/Close the window
- Motion - Walk past the motion
- Glassbreak - Press the test button for 5 seconds then release
- Smoke - Press and hold the test button for 15 seconds
- Carbon - Press and hold the test button for 15 seconds
- Flood - Use a damp cloth to get the prongs on the bottom of the sensor wet
7. Press Back arrow 3 times to end test
GC2
- Ensure panel is disarmed
- Press Security
- Press Menu
- Press Toolbox
- Enter 4 digit code
- Tap system test
- Trigger the sensor
- Door - Open/Close the door
- Window - Open/Close the window
- Motion - Walk past the motion
- Glassbreak - Press the test button for 5 seconds then release
- Smoke - Press and hold the test button for 15 seconds
- Carbon - Press and hold the test button for 15 seconds
- Flood - Use a damp cloth to get the prongs on the bottom of the sensor wet
8. Press Cancel
9. Press Home button
Lynx Touch
- Ensure panel is disarmed
- Press More
- Press Tools
- Enter 4 digit code
- Tap Test
- Tap Walk Test
- Trigger the sensor
- Door - Open/Close the door
- Window - Open/Close the window
- Motion - Walk past the motion
- Glassbreak - Press the test button for 5 seconds then release
- Smoke - Press and hold the test button for 15 seconds
- Carbon - Press and hold the test button for 15 seconds
- Flood - Use a damp cloth to get the prongs on the bottom of the sensor wet
8. Disarm panel to end test
