Fluent Help Center

    2GIG GC3 - Radio Not Responding

    Seeing a Radio Not Responding or Dual-Path Communication (cellular) error? The following steps will help resolve this.

    Tools Needed: Small Phillips-head screwdriver

    1. Ensure system is disarmed
    2.  Unplug the transformer
    3. Loosen set screw on bottom of panel (does not come out all the way)

    4. Remove panel from wall by pulling on bottom 2 corners

    5. Hang panel from wall mount with white strap

    6. Disconnect panel battery

    7. Let sit for 20-30 seconds

    8. Plug battery back in, making sure wire is tucked into the panel

    9. Remount panel to wall mount (hook from top and swing down, then clip into place)

    10. Plug transformer back in

    11. Wait 2-5 minutes

    12. At the Home screen, tap System Settings

    13. Enter the 4-digit master code

    14. Scroll down to and then select Cell Radio Swap

    15. Press Start Radio Test 

    16. Once panel shows "Successful", press Done, then press the back arrow

    17. Tighten set screw

    If the issue persists, please call our Technical Support team at 855-238-4826 for further assistance.

    Did this help resolve your question?

    Send feedback

    Can’t find what you’re looking for?

    Our award-winning customer care team is here for you.

    Contact Support
    Fluent's Blog Fluent on Facebook Fluent on Twitter